for LS Engine Oil Pressure Sensor Relocation Kit for C5/C6 Corvette, Silverado, Tahoe, Sierra, Suburban, Yukon, Escalade w/ LS1-LS9 Engines

Oil Pressure Sensor Relocation Kit for GM LS-Engine VehiclesThis kit provides a solution for relocating the factory oil pressure sensor on GM vehicles powered by LS-series V8 engines. It is designed to extend the sensor to a more accessible location, which can simplify future service or the installation of aftermarket gauges.Compatibility (Engine-Specific)This kit is designed for the ENGINE, not just the vehicle model. It is compatible with GM vehicles equipped with the following LS-family engines:Engines: LS1, LS2, LS3, LS6, LS7, LS9.Common Vehicle Applications (2003-2010 Models): Chevrolet Corvette (C5, C6), Silverado 1500/2500/3500, Tahoe, Suburban, Avalanche, TrailBlazer; GMC Sierra, Yukon, Envoy; Escalade; and others.Replaces / Equivalent to: GM 12677836.Critical Note: Many compatible vehicle models (e.g., TrailBlazer, Envoy) were offered with different engine options. You must verify your vehicle is equipped with an LS V8 engine (e.g., 5.3L, 6.0L). The kit will NOT work with non-LS engines like the 4.2L inline-6.Product Specifications & ComponentsHose: Braided stainless steel outer sheath with an inner PTFE (Teflon) liner.Pressure Rating: Designed for engine oil pressure systems.Fittings: Typically includes a brass or steel adapter to connect to the engine block and a fitting for the sensor itself. (Please refer to product images for exact contents).Function: Creates a secure, leak-resistant extension between the engine’s oil gallery and the relocated sensor.Installation Guide & PrecautionsConfirm Compatibility: This is the most important step. Identify your engine type via the VIN or underhood emission label.Safety & Preparation: Disconnect the negative battery terminal. Ensure the engine is cool. Locate the factory oil pressure sensor on the engine (typically near the oil filter or rear of the intake manifold).Relocation: The installation involves unscrewing the factory sensor, installing the supplied adapter in its place, routing the braided line to the desired new location, and then installing the sensor into the end fitting of the line.Sealing & Tightness: Use thread sealant suitable for oil applications on all fittings as needed. Tighten all connections firmly but avoid over-torquing, especially on aluminum engine components.Leak Check: After installation, start the engine and carefully inspect every connection for oil leaks. Address any leaks immediately.DisclaimerThis product is a mechanical modification kit. The installer is solely responsible for verifying correct application for their specific vehicle/engine, ensuring a proper and safe installation that does not interfere with other components, and checking for leaks. Incorrect installation could lead to oil loss and engine damage. The seller is not liable for any issues resulting from misapplication, improper installation, or use.

• Broad Compatibility for LS Engines – This kit is designed for GM vehicles equipped with LS-series engines (LS1, LS2, LS3, LS6, LS7, LS9). Compatible with many 2003-2010 Corvette, Silverado, Tahoe, Suburban, Sierra, Yukon, and Escalade models
• High-Pressure & Durable Construction – Features a PTFE-lined braided stainless steel hose assembly, designed to be corrosion-resistant and rated for high-pressure oil system applications
• Relocates the Factory Sensor – Provides an extension kit to move the oil pressure sensor from its stock location to a more accessible position, which may facilitate easier sensor replacement or gauge installation
• Complete Kit with Fittings – Includes the necessary high-pressure hose, adapters, and fittings to connect the relocated sensor to the engine block’s original oil pressure port
• Important Pre-Purchase Verification – Not all listed vehicles are equipped with LS engines. Please confirm your specific vehicle has an LS engine (e.g., 4.8L, 5.3L, 6.0L, 6.2L, 7.0L V8) before ordering to ensure compatibility.